2013 FERRARI 458 Spider

 

2013 FERRARI 458 Spider

The new Ferrari 458 Spider joins the 458 Italia, widening the range of Ferrari's mid-rear engined V8s and offering the same uncompromising technological solutions, handling and performance in a refined open-top configuration. It is equipped with a Ferrari patented, fully retractable hard top, a world first for a sports car with this lay-out.

The 458 Spider is powered by Ferrari's naturally-aspirated, direct-injection 4.5 litre V8 which was nominated as the 2011 International Engine of the Year for its engineering excellence in terms of driveability, performance, economy and refinement. The power is transferred to the road by Ferrari's class-leading dual-clutch F1 paddle-shift transmission through the sophisticated E-Diff, itself integrated with the F1-Trac traction control and high-performance ABS for maximum handling dynamics.

Certain features, such as its accelerator pedal mapping and the damping of the multilink suspension, have been calibrated to guarantee maximum sportiness and absolute driving pleasure with the top down, in line with Maranello's exclusive spider tradition. Even the engine soundtrack has been honed to ensure that the car's occupants are completely captivated by the drop-top driving experience.

Entirely in aluminium, the hard-top solution adopted for the Ferrari 458 Spider offers a number of advantages over the traditional folding soft-top, including a reduction of 25 kg in weight and a deployment time of just 14 seconds. Fully integrated into the styling of the car, the hard-top was engineered to fit neatly ahead of the engine bay without compromising aerodynamics or the performance of the car. The small space needed to house the roof enables the designers to include a generous rear bench for luggage behind the seats.

The rear of the car is characterised by innovative forms with the buttresses designed to optimise the flow of air to the engine intakes and the clutch and gearbox oil radiators. For maximum comfort whilst driving top down the Ferrari 458 Spider features a generously-sized adjustable electric wind stop. The design was perfected to slow and diffuse the air in the cockpit, enabling normal conversation to be held even at speeds over 200 km/h.

New technical solutions adopted for the chassis guarantee identical levels of structural rigidity with the roof up or down. The result is a car that is truly exciting to drive, blending extreme performance with the responsiveness that has always characterised Ferrari's open-top berlinettas. 

2012 FERRARI FF

 

2012 FERRARI FF

The official Prancing Horse web site, Ferrari.com, has revealed the first photographs of the new Ferrari FF, the company's most powerful, versatile four-seater ever, as well as its first ever four-wheel drive car.

The FF - an acronym for Ferrari Four (four seats and four-wheel drive) - ushers in an entirely new GT sports car concept. A decisive break with the past, the new car represents not so much an evolution as a true revolution.

This new V12 melds to an unprecedented level an extremely sporty, high-performance character with incredible versatility, superb comfort and sophisticated elegance, guaranteeing both driver and passengers an absolutely unique driving experience.

Designed by Pininfarina, the shape and proportions perfectly interpret the Ferrari FF's harmonious blend of sporting DNA and extraordinary usability.

The FF features the company's first ever four-wheel drive system. Ferrari's exclusive, patented 4RM (four-wheel drive) weighs 50 per cent less than a conventional four-wheel drive system, maintaining perfect weight distribution (53 per cent over the rear axle). Completely integrated with the car's electronic dynamic control systems, the four-wheel drive technology delivers record levels of performance on all terrains and in all conditions via continuous and intelligent predictive torque distribution to all four wheels. The Ferrari FF is also equipped with the latest magnetorheological damping system (SCM3), as well as the most recent development in carbon-ceramic brakes from Brembo.

Exceptional performance levels come courtesy of the new 6,262 cc direct injection engine which develops 660 CV at 8,000 rpm. In tandem with its transaxle dual-clutch F1 gearbox, stunning acceleration figures (0-100 km/h in 3.7 sec.) are guaranteed. The new model's class-leading weight-to-power ratio of 2.7 kg/CV, along with its ideal weight distribution, ensures exceptionally responsive handling. The result is that owners will be able to enjoy the FF's prowess over a wide range of uses: city driving, on low grip or snow-covered surfaces and on the track. Performance aside, Maranello's latest model also offers standards of passenger space, comfort, in-car spec and equipment previously unheard of in such a high-performance car. It can comfortably accommodate four people and their luggage, thanks to the best cabin space and boot capacity (450 litres extendable to 800) figures in its category, including four-door cars.

A vast array of personalisation options and accessories has been developed for the Ferrari FF. These include six model-specific exterior colours and sumptuous interior trim incorporating specially selected and treated aniline leather.

The Ferrari FF, which will make its official debut in occasion of the 2011 Geneva Motor Show, is presented with the first three photos from a dedicated shoot by Giovanni Gastel.

2011 FERRARI 458 Challenge

2011 FERRARI 458 Challenge

The Ferrari 458 Challenge has made its world premiere debut in Maranello during the Annual Dealer Meeting, a traditional event that brings together the representatives of Ferrari's international sales network.

The new berlinetta, which will flank the F430 Challenge in the Ferrari Challenge Trofeo Pirelli in the 2011 season, is the fifth model used by Ferrari in its one-make championship which, next year, will be extended to include a new Asia-Pacific series.

Coming just a few months after the 2010 Frankfurt Motor Show unveiling of the Ferrari 458 Italia on which it is based, the Ferrari 458 Challenge introduces a number of important modifications to adapt it for competition use.

The direct injection 4497 cc V8 remains strictly in production tune, with an output of 570 hp at 9,000 rpm. That said, modifications have been made to the gear ratios and calibration of its dual-clutch F1 gearbox to guarantee higher torque at lower revs. The Ferrari 458 Challenge is also equipped with the E-Diff electronic differential already employed on the road-going version, a first for Ferrari's track-only cars.

Significant work has also gone into cutting the car's weight. This focused on both the exterior and interior with Ferrari's engineers concentrating in particular on reducing the thickness of the bodyshell panels and on using lightweight materials, such as carbon-fibre and Lexan.

The new Ferrari 458 Challenge also has a specific suspension set-up with solid aluminium bushings, stiffer springs, single-rate dampers, centre-nut 19" racing rims, larger dimension Pirelli slicks and a ride height lowered by 30mm all round. It is also equipped with the new generation Brembo CCM2 brakes which debuted on the 599XX, Ferrari's extreme experimental laboratory car, and which are integrated with an ABS system that features two configurations - low grip and high performance for dry surfaces.

Another first for a Ferrari Challenge model is the adoption of the F1-Trac traction control system, the most sophisticated of its kind. Developed in-house by Ferrari, the F1-Trac system constantly monitors levels of grip for maximum high-performance road-holding. Two specific track-biased calibrations - wet and dry - have been developed for this application, with control logic and strategies derived from Ferrari's extensive racing experience in the F1 and GT championships. The F1-Trac is completely integrated with the E-Diff to guarantee maximum acceleration out of corners.

The required ABS, F1-Trac and E-Diff calibration settings are selected via the manettino on the steering wheel, the first time this solution has been adopted on a model developed for the Ferrari Challenge series. The driver can thus either chose from the WET or DRY configurations. In high grip conditions it is also possible to select CT-OFF to de-activate the F1-Trac traction control.

In the course of the intensive development sessions involved in honing the Ferrari 458 Challenge for the track, the engineers also managed to improve the car's lap time at Fiorano by two seconds over that of its predecessor, resulting in a new record of just 1'16.5". Equally impressive is the amount of lateral grip the new car generates - up to 1.6G.

With the new 458 Challenge, Ferrari is offering its sportier clients - professional and gentlemen drivers alike - a car that is extremely responsive, with great performance and superb handling. This mid-rear V8-engined berlinetta will allow Ferrari Challenge participants to enjoy to the full the exhilarating cut and thrust of the race weekends on the world's leading circuits, as well as the passion that has always been an integral part of Ferrari's one-make championship.

2011 FERRARI 599 SA Aperta

 

2011 FERRARI 599 SA Aperta

Ferrari is delighted to announce the presentation of the Ferrari 599 SA Aperta at the 2010 Paris International Motor Show. This is a special series model of which a strictly limited number of just 80 will be built. All have already been sold. Ferrari chose to build 80 SA Apertas in celebration of Pininfarina's 80th anniversary. The SA nomenclature also pays homage to both Sergio and Andrea Pininfarina whose company and work have been linked to the most successful road-going cars ever built at Maranello.

The Ferrari 599 SA Aperta is a true roadster which allows its occupants to enjoy the superlative emotions afforded by our signature front-engined V12 architecture in a completely open-top setting. In fact, it has just a light soft top designed to be resorted to only if the weather gets particularly bad. A low-slung windscreen and the fact that it crouches lower to the ground than our other models lend the SA Aperta an exceptionally aerodynamic sleekness. Its profile arches back from the A-post to two aerodynamic fins beautifully integrating the two roll-bars which themselves cleverly mimic the outline of the seats.

The chassis has been redesigned to deliver a standard of stiffness comparable to that of a closed berlinetta and there is a negligible weight difference also, thanks to work done on the chassis structure.

Thanks to the 670 CV engine beneath its bonnet, the SA Aperta beautifully embodies the sporty spirit of the Ferrari 599, incorporating Ferrari's most advanced technology to deliver absolutely benchmark performance and superb driving pleasure. Its interior too is stylishly sporty with particularly sophisticated materials, trim and colours used throughout. The virtually endless combinations available guarantee that each and every SA Aperta is absolutely unique.

2011 FERRARI 458 Italia

2011 FERRARI 458 Italia

While it's true that every Ferrari is innovative by definition, it's equally true that in the course of the Prancing Horse's history, certain cars have marked a genuine departure from the current range. This is very much the case with the Ferrari 458 Italia, which is a massive leap forward from the company's previous mid-rear engined sports cars.

The new model is a synthesis of style, creative flair, passion and cutting-edge technology, characteristics for which Italy as a nation is well-known. For this reason Ferrari chose to add the name of its homeland to the traditional figure representing the displacement and number of cylinders.

The Ferrari 458 Italia is a completely new car from every point of view: engine, design, aerodynamics, handling, instrumentation and ergonomics, just to name a few.

A two-seater berlinetta, the Ferrari 458 Italia, as is now traditional for all Ferrari's road-going cars, benefits hugely from the company's Formula 1 experience. This is particularly evident in the speed and precision with which the car responds to driver inputs and in the attention focused on reducing internal friction in the engine for lower fuel consumption than the Ferrari F430, despite the fact that both overall displacement and power have increased. However, Ferrari's track experience makes its presence felt in the Ferrari 458 Italia not only in terms of pure technological transfer but also on a more emotional level, because of the strong emphasis on creating an almost symbiotic relationship between driver and car. The Ferrari 458 Italia features an innovative driving environment with a new kind of steering wheel and dashboard that is the direct result of racing practice. Once again input from Michael Schumacher - who was involved from the very start of the Ferrari 458 Italia project - played an invaluable part.

The Ferrari 458 Italia's Pininfarina design provides further evidence of the complete departure from the past that this new car hails. The Ferrari 458 Italia has a compact, aerodynamic shape, underscoring the concepts of simplicity, efficiency and lightness that inspired the project. As with every Ferrari, the car's styling has been very heavily influenced by the requirements for aerodynamic efficiency, as can be seen from the downforce of 140 kg at 200km/h generated by the new model. The front features a single opening for the front grille and side air intakes, with aerodynamic sections and profiles designed to direct air to the coolant radiators and the new flat underbody. The nose also sports small aeroelastic winglets which generate downforce and, as speed rises, deform to reduce the section of the radiator inlets and cut drag.

The new 4499 cc V8 is the first Ferrari direct injection engine to be mid-rear mounted. It has a very low piston compression height typical of racing engines which contributed to achieving its compression ratio of 12.5:1. Equipped with the traditional flat-plane crankshaft, the engine delivers 570 CV at 9000 rpm and, with an outstanding power output of 127 CV/litre, sets a new benchmark not only for the whole Ferrari range and the history of company, but also for the entire market segment. Maximum torque is 540 Nm at 6000 rpm, over 80 per cent of which is available from 3250 rpm. Specific torque is a record 120 Nm/litre. However, what is truly extraordinary is the amount of torque available while still maintaining high levels of power at low revs.

The car's soundtrack is also typical Ferrari, with an exciting, powerful growl emerging from the engine before it channels through to the exhaust's three rear tailpipes.

The Ferrari 458 Italia is equipped with the seven-speed dual-clutch transmission which increases performance whilst providing very smooth shifts even at full throttle. The engineers have developed specific, sportier gear ratios to match the power and torque curves of the new V8, guaranteeing high torque even at lower engine speeds and allowing the car to reach its maximum speed in top gear.

This new Ferrari is also a major leap forward when it comes to cutting emissions. Despite the fact that the new engine is significantly more powerful than the V8s that preceded it, the Ferrari 458 Italia produces just 320 g/km of CO2 and fuel consumption is 13.7 l/100 km (combined cycle), the best in the entire segment.

The engineers also focused on weight reduction during the design phase for similar reasons. Consequently, the Ferrari 458 Italia has a dry weight of 1380 kg with a power-to-weight ratio of 2.42 kg/CV. Weight distribution is also optimal with 58 per cent over the rear axle. The result of the engineers' endeavours can be summed up in to two simple statistics which together perfectly encapsulate the Ferrari 458 Italia's exceptional performance: 0-100 km/h acceleration in under 3.4 seconds and a maximum speed in excess of 325 km/h.

For the new chassis, once more in aluminium, Maranello's engineers incorporated various types of advanced alloys along with aerospace industry-derived manufacturing and bonding techniques.

With regard to vehicle dynamics, the Ferrari 458 Italia's suspension features twin wishbones at the front and a multi-link set-up at the rear tuned for maximum roadholding and superlative handling. Along with a more direct steering ratio, the Ferrari 458 Italia thus offers extremely rapid turn-in and body control whilst maintaining superior ride comfort.

The integration of the E-Diff and F1-Trac (now controlled by the same ECU) and their respective mappings is even greater, resulting in a 32 per cent increase in longitudinal acceleration out of corners compared to previous models. The evolution of the control logic, with even faster and more accurate calculation of levels of grip, ensures even greater roadholding, better handling and ease of control on the limit.

The same ECU also governs the high-performance ABS, providing even more precise control over the logic threshold and greater efficiency. The brakes also feature a prefill function whereby the pistons in the callipers move the pads into contact with the discs on lift off to minimise delay in the brakes being applied. This combined with the ABS has cut the 100-0 km/h braking distance to a mere 32.5 metres.

The Ferrari 458 Italia's interior is another area of the car that exalts its sporty personality. The driver is welcomed by a new layout and a revolutionary ergonomic interface where the main controls are all clustered on the steering wheel.

With the Ferrari 458 Italia, Maranello has brought a highly distinctive new car to its 8-cylinder range. The company now offers two models that share a common, race-derived DNA, both exceptionally sporty and fun to drive in true Ferrari tradition, but aimed at two very different kinds of client. While the Ferrari California was created for owners requiring a more versatile sports car with a practical edge, the Ferrari 458 Italia is designed for owners for whom the priority is uncompromising on-road performance with occasional track day capability, but who still demand a car that is useable in day-to-day driving like all Ferrari's recent models.

Ferrari 458 Italia - Technical specifications

* Dimensions
o Length: 4527 mm (178.2 in.)
o Width: 1937 mm (76.3 in.)
o Height: 1213 mm (47.8 in.)
o Wheelbase: 2650 mm (104.3 in.)
o Dry weight: 1380 kg (3042 lbs)
o Weight/power ratio: 2,42 kg/CV (7.16 lbs/kW)
o Weight distribution (front/rear): 42%/58%
* Engine
o Type: V8 - 90°
o Displacement: 4499 cc (274.5 cu in.)
o Maximum power: 570 CV (425 kW) @ 9000 rpm
o Maximum torque: 540 Nm (398 lbs/ft) @ 6000 rpm
o Specific power output: 127 CV/l
o Compression ratio: 12.5:1
* Tyres
o Front: 235/35 ZR20 8.5"
o Rear: 295/35 ZR20 10.5"
* Performance
o Maximum speed: >325 km/h (>202 mph)
o 0-100 km/h: <3.4 s
* Fuel consumption + emissions
o Fuel consumption: 13.7 l/100 km
o Emissions: 320 g CO2/km
* Gearbox
o Dual-clutch, 7-speed F1
o Electronics
o E-Diff3, F1-Trac, high-performance ABS

2010 FERRARI 599 GTB HY-KERS Concept

Ferrari at the 2010 Geneva Motor Show gives the public its first glimpse of the HY-KERS vettura laboratorio which can reduce CO2 emissions by 35 per cent on the combined cycle (ECE + EUDC). The HY-KERS is based on the 599 GTB Fiorano but importantly, the technology may one day be fitted to all future Ferraris, 8- and 12-cylinders alike, regardless of their engine position. Thanks to ongoing research combined with experience gained in Formula 1, the new technology developed at Maranello actually accentuates the cars' sporty character and driving involvement.

One of the principle objectives of the project is ensuring that Ferrari will be in a position to comply with future CO2 emissions standards, particularly in terms of the urban cycle. City driving is traditionally where sports cars are most penalised as their engines are designed for maximum efficiency and performance at high revs, whereas the urban cycle involves low revs and low engine loads.


There are many original aspects to the new Ferrari hybrid transmission, starting with its architecture. Firstly, weight distribution has not been altered. This is thanks to positioning the batteries below the floorpan of the car, and the use of a compact electric motor coupled to the rear of the F1 dual-clutch gearbox. Not only does this layout not affect dynamic performance, it actually improves it, by lowering the centre of gravity. Cockpit room and luggage space are also unaffected.

Maranello's engineers also employed Ferrari's track experience in the design, engineering and manufacture of this innovative electric motor which produces over 100 hp. The algorithms and control logics controlling the torque, traction and braking distribution functions are directly derived from Formula 1.

The solution adopted for the HY-KERS represents just one of the possible technologies for the future, but in the meantime Ferrari continues to evolve its models and increase their overall efficiency. Thus research continues into reducing drag, improving rolling resistance of tyres and lowering weight as well as working on reducing engine friction to increase efficiency.

Ferrari's research into reducing energy consumption has not been focused merely on its cars but also extends to the various production methods employed throughout the Maranello factory where the entire manufacturing process is carried out, from the foundry to the final assembly. In the course of 2010, Ferrari will cut CO2 emissions by 30,000 tons (-40 per cent) and Particulate Matter (PM) levels by 65 per cent. This will be achieved thanks to the company's photovoltaic system and Italy's largest trigeneration plant (which produces electricity, hot and cold water), making Ferrari entirely self-sufficient from an energy point of view. This reduction also means that Ferrari will meet the Kyoto protocol objectives a full 10 years ahead of schedule and with double the figure imposed on Europe.

2010 FERRARI P540 Superfast Aperta

2010 FERRARI P540 Superfast Aperta

The first shake-down has been held at Fiorano of a very special one-off, the Ferrari P540 Superfast Aperta, built for an American client. The car, the second in a new Special Projects programme created by Ferrari to meet requests from the most discerning clients and collectors to create truly unique models, is based on the Ferrari 599 GTB Fiorano and was inspired by a Carrozzeria Fantuzzi-designed Ferrari built specifically for the 1968 Fellini film, Toby Dammit, itself inspired by one of the tales of Edgar Allan Poe.

The Ferrari P540 Superfast Aperta's proud new owner, Edward Walson, son of John Walson, the inventor of cable TV, approached Ferrari in 2008 to produce a modern reinterpretation of the gold-coloured car in the film. "I had always dreamed of designing sports cars," Walson explains, "and when I saw this film the decision came of its own accord: one day I would have 'my' Ferrari."

In accordance with the Special Project's approach to producing such individual one-offs, the Ferrari P540 Superfast Aperta respects all existing international safety and homologation requirements and is thus road legal. The car was designed by Pininfarina and built in Maranello, and the client was directly involved in each stage of its development. As the 599 GTB Fiorano donor car is a coupé, considerable effort went into strengthening the chassis by using finite element analysis in development and the increase in weight was kept down to just 20 kg by employing carbon-fibre extensively. From the initial sketches to the final, road-legal car took just 14 months.

As the client took delivery of the car at Fiorano his excitement was understandable: "This is the most special Christmas present of my life."

Curiosity

This special Ferrari P540 Superfast Aperta's colour was inspired by the film "Toby Dammit", one of the three episodes of the film "Histoires Extraordinaires" made in 1968 based on stories by Edgar Allan Poe.

"Toby Dammit", the third of the three episodes, directed by Federico Fellini, with Terence Stamp Salvo Randone and Milena Vukotic, based on the story "Never Bet The Devil Your Head".

The other two episodes, "Metzengerstein" and "William Wilson", were directed by Roger Vadim and Louis Malle.

Technical specifications

* Length: 4731 mm
* Width: 1954 mm
* Height: 1300 mm
* Wheelbase: 2750 mm
* Front track: 1690 mm
* Rear track: 1620 mm
* Engine
o Type: 65° V12
o Displacement: 5999 cc
o Maximum power: 456 kW (620 CV) at 7600 rpm
o Maximum torque: 608 Nm (62 kgm) at 5600 rpm
* Transmission: F1 6-speed gearbox
* Tyres
o Front: 245/35 20"
o Rear: 305/35 20"
* Fuel consumption
o Combined cycle: 17.9 l/100 km
o CO2 emissions: 415 g/km

2010 FERRARI 599 GTB Fiorano HGTE

When it first debuted, the Ferrari 599 GTB Fiorano set a new standard in terms of performance that remains a benchmark for new sports car development to this day. Now Ferrari is introducing the new Ferrari 599 GTB Fiorano HGTE (Handling Gran Turismo Evoluzione) package for the model to further underscore its sportiness and handling.

The package includes a modified set-up with stiffer springs and rear anti-roll bar as well as new calibration settings for the magnetorheological shock absorbers when the manettino is at its sportier settings. The ride height has also been lowered which in turn lowers the car's centre of gravity. This combined with the new set-up helps improve body control. The package also includes specifically optimised tyres featuring a compound that offers even better grip.

The car's electronics have also evolved to ensure even more prompt response to driver commands. The F1 gearbox's shifts are now even faster in high-performance settings, while a new engine software strategy has improved accelerator response.

The exhaust silencer has also been modified with the result producing an even more marked and thrilling sound under hard usage whilst still delivering just the right comfort levels at cruising speed.

From a styling point of view, the package also includes some distinctively sporty exterior and interior features with carbon-fibre widely used in the latter. The 20" split-rim wheels are new with a special diamond-cut and matte silver finish. The rear diffuser is finished in matte black to underscore the car's new set-up and highlight the chromed tail pipes. The cabin is sportier too thanks to a sophisticated mix of full-grain leather, black Alcantara® and carbon-fibre trim.

The new seats are trimmed in a new two-tone combination of leather with black Alcantara® inserts, and the seat backs are trimmed entirely in carbon-fibre. Embroidered in contrasting stitching on the headrest are a Prancing Horse and the words "Handling GTE".