The Bentley Continental Supersports Convertible further strengthens Bentley's supercar range, following the introduction of the Bentley Continental Supersports Coupé in 2009. The new Supersports Convertible, with the same 630PS (621bhp/463kW) twin-turbocharged W12 engine, is the fastest, most potent drop-top Bentley has ever built, offering the ultimate Bentley driving experience in the world's most dramatic convertible.
A highly focussed, pure Bentley driving experience
With 630PS (621bhp) and 800Nm (590lb ft) of torque from its pioneering FlexFuel engine and new 'Quickshift' transmission, the Bentley Continental Supersports Convertible is the fastest drop-top Bentley has ever built. It accelerates from 0-60mph in 3.9 seconds (0-100km/h in 4.2 seconds) and, conditions permitting, can continue onto a top speed of 202mph (325km/h).
The increased power and torque are transmitted to the all-wheel drive system via an uprated and rapid six-speed Quickshift transmission, which more than halves shift times (to just 93 milliseconds) and maximises the new Convertible's enormous potential. The revised gearbox also has the ability to deliver double downshifts (sixth to fourth gear, for example) and improves acceleration across the entire gear range. To cope with the additional power and torque, the planetary gear set of the ZF transmission is also strengthened.
Positive torque during downshifts is achieved through engine and gearbox electronic controller interaction for extra throttle and fuel injection during the overrun. During transmission upshifts, fuel and ignition are cut momentarily to give faster mechanical shift times through torque reduction, also improving shift quality and durability.
Designing the 'extreme' Bentley convertible- where form follows function
The evolution of the Bentley Continental Supersports Convertible's design is very much a case of form following function, with new purposeful sculptural forms signalling the engineering changes beneath the skin. Key engineering-led design changes to the Supersports include:
* Revised front air intakes and new bonnet vents to improve airflow and cooling
* Flared rear wings to accommodate wider rear track
* Discreet bootlid spoiler benefitting aerodynamic balance at high speeds
The increased power and torque of the W12 engine necessitated an additional 10 per cent airflow to the twin turbocharger intercoolers and cooling system. With extensive use of Computational Fluid Dynamics techniques, Bentley's designers responded with a purposeful and dramatic style, featuring large vertical intake apertures. Twin bonnet vents were added to ensure positive air extraction.
From the front, the radiator, lower grille and dual bonnet vents are finished in a striking Smoked Steel finish. Derived from an innovative technology normally used to apply a coating to luxury watches and specialised industrial tools, Physical Vapour Deposition (PVD) is a complex and time-consuming process that involves vaporised metal being deposited onto the surface of, in this case, stainless steel.
Giving a darker, more solid appearance, it is the first use of a PVD finish on stainless steel in the car industry. In addition to the Smoked Steel finishes, a gloss black finish to the headlamp casings and rear lamp clusters gives the Bentley Continental Supersports convertible's distinctive face and muscular rear additional visual impact.
Restyled - and more aerodynamic - door mirrors match the exterior paint choice and the window and door surrounds replace polished stainless steel with a Smoked Steel finish to match the front grille. Eye-catching, black gloss Bentley-branded brake calipers act on the carbon ceramic brakes. Surrounding the brakes are the unique 20-inch, forged alloy wheels with Smoked Steel-finish which are exclusive to Supersports models. Large diameter tailpipe trims round out the car's purposeful stance when viewed from the rear. Beneath the bonnet Supersports badges grace the cover of the 630PS (621bhp) W12 engine.
The Bentley Continental Supersports Convertible has an electrically operated, three-layer fabric hood with advanced acoustic insulation to provide superb levels of refinement and comfort when raised. A choice of eight hood colours are available, including a new Dark Grey Metallic option, which is achieved by weaving a 'grey' acrylic fibre with a semi-transparent 'metallic effect' fibre in a twill weave construction to create a directional colour effect.
A highly focussed, pure Bentley driving experience
With 630PS (621bhp) and 800Nm (590lb ft) of torque from its pioneering FlexFuel engine and new 'Quickshift' transmission, the Bentley Continental Supersports Convertible is the fastest drop-top Bentley has ever built. It accelerates from 0-60mph in 3.9 seconds (0-100km/h in 4.2 seconds) and, conditions permitting, can continue onto a top speed of 202mph (325km/h).
The increased power and torque are transmitted to the all-wheel drive system via an uprated and rapid six-speed Quickshift transmission, which more than halves shift times (to just 93 milliseconds) and maximises the new Convertible's enormous potential. The revised gearbox also has the ability to deliver double downshifts (sixth to fourth gear, for example) and improves acceleration across the entire gear range. To cope with the additional power and torque, the planetary gear set of the ZF transmission is also strengthened.
Positive torque during downshifts is achieved through engine and gearbox electronic controller interaction for extra throttle and fuel injection during the overrun. During transmission upshifts, fuel and ignition are cut momentarily to give faster mechanical shift times through torque reduction, also improving shift quality and durability.
Designing the 'extreme' Bentley convertible- where form follows function
The evolution of the Bentley Continental Supersports Convertible's design is very much a case of form following function, with new purposeful sculptural forms signalling the engineering changes beneath the skin. Key engineering-led design changes to the Supersports include:
* Revised front air intakes and new bonnet vents to improve airflow and cooling
* Flared rear wings to accommodate wider rear track
* Discreet bootlid spoiler benefitting aerodynamic balance at high speeds
The increased power and torque of the W12 engine necessitated an additional 10 per cent airflow to the twin turbocharger intercoolers and cooling system. With extensive use of Computational Fluid Dynamics techniques, Bentley's designers responded with a purposeful and dramatic style, featuring large vertical intake apertures. Twin bonnet vents were added to ensure positive air extraction.
From the front, the radiator, lower grille and dual bonnet vents are finished in a striking Smoked Steel finish. Derived from an innovative technology normally used to apply a coating to luxury watches and specialised industrial tools, Physical Vapour Deposition (PVD) is a complex and time-consuming process that involves vaporised metal being deposited onto the surface of, in this case, stainless steel.
Giving a darker, more solid appearance, it is the first use of a PVD finish on stainless steel in the car industry. In addition to the Smoked Steel finishes, a gloss black finish to the headlamp casings and rear lamp clusters gives the Bentley Continental Supersports convertible's distinctive face and muscular rear additional visual impact.
Restyled - and more aerodynamic - door mirrors match the exterior paint choice and the window and door surrounds replace polished stainless steel with a Smoked Steel finish to match the front grille. Eye-catching, black gloss Bentley-branded brake calipers act on the carbon ceramic brakes. Surrounding the brakes are the unique 20-inch, forged alloy wheels with Smoked Steel-finish which are exclusive to Supersports models. Large diameter tailpipe trims round out the car's purposeful stance when viewed from the rear. Beneath the bonnet Supersports badges grace the cover of the 630PS (621bhp) W12 engine.
The Bentley Continental Supersports Convertible has an electrically operated, three-layer fabric hood with advanced acoustic insulation to provide superb levels of refinement and comfort when raised. A choice of eight hood colours are available, including a new Dark Grey Metallic option, which is achieved by weaving a 'grey' acrylic fibre with a semi-transparent 'metallic effect' fibre in a twill weave construction to create a directional colour effect.
